Blogging Cents

Deadline.com

header photo

A Breakdown Of Criteria In Compact Machining Centers

February 16, 2016

This, along with a box-in-box construction, allows for rapid acceleration/decaleration rates with minimal vibration. The spindle is also shorter for reduced acceleration/deceleration time. The Kitamura G-Series provides quality and reliability with attention to detail. The goal for over 35 years in business, has been to maintain a high standard of service and support for our worldwide customer base. Linear scale feedback with 5-nanometer resolution allows the machine to achieve sub-micron repeatability at the tool tip, as opposed to only This Site along individual axes. For increased capability. An optimized spindle overhang design has minimized the rotational inertial load, enhanced rigidity, and shortened accel/decel time.  Article From: 4/6/2009 Modern Machine Shop, Peter Zelinski, Senior Editor Applications so far have typically used 0.002- to 0.004-inch tools, though smaller tools have also been used. Kent this site CDC is a one-step shop for all CDC manufacturing needs.

Linear Motors In Three Axes Provide Acceleration Better Than 2G.

The machine uses linear motors and 5-nm glass scale feedback. No matter what your industry or application, CBSNA will deliver the perfect CDC machining canter. ©2015 CMS North America Inc. • 4095 krona At. • Caledonia, Michigan 49316 Phone: 616 698-9970 • Toll free: 800-CALL-CMS 225-5267 • Fax: 616 698-9730 The spindle cannot accommodate tools with conventional shank sizes. Article From: 4/6/2009 Modern Machine Shop, Peter Zelinski, Senior Editor Applications so far have typically used 0.002- to 0.004-inch tools, though smaller tools have also been used. What sets Kent CDC apart from the rest? The smaller bed size facilitates the use of a solid slab of granite for the machining table, which provides increased rigidity to minimize vibration, the company says. We are capable of meeting all customer demands with an extensive inventory, including compact models for the most efficient use of floor space, standard #40 and #50 taper models in Linear and Box Way designs, to models with a travelling Column or Double Column designs, Kent CDC is here to help you get things done more efficiently and economically while staying competitive over time. The swing over bed is 23.6”; swing over saddle is 15.4”; the maximum turning diameter is 15.4”, while the maximum bar working diameter is 3.2” The maximum turning length is 22.1”. It features a vector drive of 30 Np 22.4 kW and a 40-taper... With a work cube of about 4 inches, the machine is available with a 100,000-rpm air-cooled or 200,000-rpm water-cooled spindle.

Kent CDC has worked with me to help meet my needs even if they had to go beyond their call of duty. CBS North America offers a wide variety of speciality CDC machining canters to meet the needs of nearly any application. Pulleys, belt and intermediate gears have all been eliminated on the machine and have been replaced with a larger servomotor. The goal of Kent CDC is to provide market competitive products and solutions to our customers through maintaining industry benchmarked quality, cost and delivery metrics. The spindle design features three angular ball bearings in the front and cylindrical roller bearings in the rear, which minimizes thermal http://www.kentusa.com/mills/ growth and increases precision. An optional 90 tool ATC can be added to the in the field. With a work cube of about 4 inches, the machine is available with a 100,000-rpm air-cooled or 200,000-rpm water-cooled spindle. No matter what your industry or application, CBSNA will deliver the perfect CDC machining canter. ©2015 CMS North America Inc. • 4095 krona At. • Caledonia, Michigan 49316 Phone: 616 698-9970 • Toll free: 800-CALL-CMS 225-5267 • Fax: 616 698-9730 The swing over bed is 23.6”; swing over saddle is 15.4”; the maximum turning diameter is 15.4”, while the maximum bar working diameter is 3.2” The maximum turning length is 22.1”. Combined, these features can substantially reduce cutting time.  

Go Back

Comment